Articles:

These numbers are just an estimate based on our experience – the actual length of time a vacuum lasts can vary wildly.

If you’d like to learn more about this vacuum cleaner, read our.in-depth test and review of the Black+Decker Pivot PV1820LGB.

Otherwise, let’s get started with the filter cleaning process..Step 1: Reset The Pivot to a Neutral Position.Before you can remove the filter housing from the Black+Decker PV1820LGB, you need to put the vacuum’s pivot design into a neutral position.. As you can see from the photo above, the neutral position is when the pivoting head is roughly parallel to the battery.

You don’t need to be exact though!.Step 2: Remove The Filter Housing.

Once the Pivot is in a neutral position, press the button on the side of the cleaning head (see the picture above).

With the button pressed, rotate the head and gently pull the filter housing away from the rest of the vacuum..and around 50% smaller than the Dyson V11, so be prepared for frequent emptying..

The main wand is a telescopic pipe that can be adjusted to suit your height.The four pre-set options give you 21cm flexibility, ranging from 93cm to 114 cm.

When at the full extension it’s the same length as the Dyson V11, but it’s useful having shorter options available for more comfortable cleaning.. On the main power unit, there’s a digital LED display to show which mode you’re in and if there are any troubleshooting alerts.The screen also contains buttons for changing power modes, which are easy to reach when pushing the vac around..